GSFC S-311-P-4/05 and S-311-P-10 Combination
D-Subminiature Connectors
APPLICATION NOTES
- For S-311-P-10 connectors, normal
mounting hole diameter is 0.120". To specify a larger mounting hole
diameter of 0.150", replace the "-12" in the part number with "-15".
See part number explanation for details.
- Hardware such as screwlocks, jackscrews, and
jackposts are required to properly secure mated connector pairs and must be
provided separately. Non-magnetic hardware is recommended to maintain controlled
residual magnetism.
- Connectors satisfy GSFC outgassing requirements
of 1% Total Mass Loss (TML) and 0.1% Collected Volatile Condensable Material
(CVCM).
- Coaxial contacts should be used for signals
of 1 GHz frequency or less. Use MIL-C-39012 connectors for higher frequencies.
- Some suppliers use a nylon insulator material
in their high voltage contacts. The nylon insulator may not meet program outgassing
limits.
- Coaxial, high voltage and crimp standard power
contacts must be supplied separately. Coaxial and high voltage contact part
numbers are procured per GSFC S-311-P-4/06. For crimp type standard power
contacts (used with S-311-P-4/05 only), procure P/N G10S1 for socket contacts
and G10P1 for pin contacts per GSFC specification S-311-P-4/10.
- For S-311-P-10 connectors "C" level
residual magnetism (20 Gamma) is available in lieu of "B" level (200 Gamma).