GSFC S-311-P-4/07 and MIL-DTL-24308 D-Subminiature
Connectors
High Density Size 22D Crimp Contacts, -55°C
to +125°C
APPLICATION NOTES
- MIL-DTL-24308 connectors
are supplied with 0.120" mounting holes or 0.086" float mount bushings.
- For S-311-P-4/07 connectors,
normal mounting hole diameter is 0.120". To specify a larger mounting
hole diameter of 0.150", replace the "-12" in the part number with "-15".
See part number explanation for details.
- Hardware such as screwlocks,
jackscrews, and jackposts are required to properly secure mated connector
pairs and must be provided separately.
- Connectors satisfy GSFC
outgassing requirements of 1% Total Mass Loss (TML) and 0.1% Collected Volatile
Condensable Material (CVCM).
- MIL-DTL-24308 connectors
are also available without contacts, with float mount bushings or as kits.
Many of these part numbers are not preferred because they are cadmium plated.
The preferred part numbers for the various contacts are listed herein.
- MIL-DTL-24308 connectors
are supplied with contacts. Replacement contact part numbers are M39029/57-354
for sockets and M39029/58-360 for pins.
- GSFC connectors are supplied
WITHOUT contacts. Procure P/N G08S1 for socket contacts and G08P1 for pin
contacts per GSFC specification S-311-P-4/08. Contacts are non-magnetic
and do not contain color band marking.