Physical Dimensions Table
 
Resistor
Style
A
B (max)
C
D
E
RN_50
0.180±0.020
(for char. C & E)
0.150±0.020
(for char. H,J,K)
0.225
1.250±0.266
0.065±0.015
0.016±0.002
RN_55
0.250+0.031,
-0.046
0.379
1.500±0.125
0.109±0.031
0.025±0.002
RN_60
0.375+0.062,
-0.115
0.561
1.500±0.125
0.125±0.040
0.025±0.002
RN_65
0.625+0.031,
-0.094
0.780
1.500±0.125
0.188+0.062,
-0.031
0.025±0.002
RN_70
0.750+0.125,
-0.250
0.939
1.500±0.125
0.250+0.078,
-0.090
0.032±0.002
Click Here for
RNC90
NOTES:
1.  Dimensions are in inches.
2.  Metric equivalents are given for general information only.
3.  The maximum length is "clean lead" to "clean lead".
4.  The end of the body shall be the point at which the body diameter equals the nearest drill size larger than 250% of the nominal lead diameter.
5.  Lead length for new design and tape and reel packaging shall be 1.00" + 0.625", -0.0".
6.  Lead concentric tolerance is to be measured at the point of lead egress from the resistor body.