2014 EEE Parts for Small Missions Talks
Click Here to Download All Available Talks in Single ZIP file
|
Time |
Session |
Wednesday September 10th |
8:00 AM |
Coffee and Registration Check-In |
9:00 AM |
Introduction and Government Agency Presentations |
Introduction and NASA Electronic Parts and Packaging Overview
Ken LaBel, NASA/GSFC
|
9:30 AM |
European Space Agency: CubeSat Overview
Roger Walker, ESA |
10:00 AM |
Break (20 min) |
10:20 AM |
Small Spacecraft Technology at NASA
Andrew Petro, NASA |
11:00 AM |
NASA CubeSat Launch Initiative
Garrett Skrobot, NASA |
11:30 AM |
Small Satellite Parts On Orbit Now (SPOON)
Charlene Jacka, AFRL |
12:00 PM |
Lunch (60 min) |
1:00 PM |
Basic Concepts |
Why Space is Unique? The Basic Environment Challenges for EEE Parts
Ken LaBel, NASA/GSFC |
1:30 PM |
Traditional EEE Part Testing versus "Higher Assembly" Validation Tests - Is Better the Enemy of Good Enough?
Henning Leidecker, NASA/GSFC |
2:00 PM |
Panel: Fault Tolerance: Does It Cure All Ills?
Leader: Jesse Leitner, NASA
|
2:30 PM |
Break (30 min) |
3:00 PM |
COTS and Risk |
Is It Wise to Fly Automotive Electronics?
Michael Sampson, NASA/GSFC |
3:30 PM |
The Challenges of PEMs Packaging
S. Ali Lilani, Integra Technologies |
3:50 PM |
Relative Radiation Risk Reduction for Small Spacecraft and New Designers
Michael Campola, NASA/GSFC |
4:20 PM |
Using Modeling to Provide Realistic Radiation Requirements
Thomas Jordan, EMPC |
4:45 PM |
End of Day 1 |
Time |
Session |
Thursday September 11th |
8:00 AM |
Coffee and Registration Check-In |
9:00 AM |
Approaches to Small Missions |
Cygnss: Lessons Learned from a Class D Mission
Jessica Stack Tumlinson, SwRI
|
9:30 AM |
RadFX: Cube-Sat Based Payload to Study Radiation Effects in Advanced Electronics
Robert Reed, Vanderbilt |
9:50 AM |
Small Satellites Hardened by Design Using Non-space Qualified EEE Parts
Roberto Cibils, INVAP |
10:10 AM |
Break (20 min) |
10:30 AM |
EEE Parts Qualification |
Tailoring Traditional Parts Qualification
Pat Dugan, NASA/GSFC |
11:00 AM |
Tailoring TOR for Class D Missions
Charles Hymowitz, AEi Systems |
11:30 AM |
Alternative Methods to Qualify EEE parts for Small Missions
Craig Hillman, DFR Solutions |
12:00 PM |
Lunch (60 min) |
1:00 PM |
Invited |
The First 200 CubeSats
Prof. Michael Swartwout, Saint Louis University |
1:30 PM |
NEPP Tasks |
CubeSat Parts Database: NASA Usage and Kit Manufacturers
Doug Sheldon, JPL |
1:50 PM |
Candidate CubeSat Processors
Steve Guertin, JPL
|
2:10 PM |
Candidate CubeSat Power Devices
Leif Scheick, JPL |
2:30 PM |
Arduino/Raspberry Pi: Hobbyist Hardware and Radiation Total Dose Degradation
Daniel Violette, UConn/NASA |
2:50 PM |
Break (25 min) |
3:15 PM |
Burn-In of Complex Commercial Parts
Marti McCurdy, Silicon 360 |
4:00 PM |
Panel and Concepts |
Panel: The "Right" Power Architecture for CubeSats
Leader: John Shue, NASA |
4:30 PM |
Wrapup Discussion |
5:00 PM |
End of Day 2 |
|